Company Profile
Social Media
Home > FAQ

What information do I need to have a solar lighting design completed?
1.Type of application - Pathways, Roadways, Area, Security, Perimeter, Sign, etc.
2.Specific light level requirements
3.City or address of the project installation location

Do you have something to match a ___ Watt light fixture?
Wattage is a function of power consumption, not brightness. We look at the lighting requirements and meet those requirements with the needed light output.

Will the solar work when it is cloudy, rainy or snowing?
Jiansheng Lighting analyzes the project parameters and sizes the system in order to have the system work through days of inclement weather. Every system is sized for a minimum of 5 days autonomy and additional storage options are available for additional security and backup if preferred.

Will the system work if it is shaded during part of the day?
Every system gets their energy directly from signlight. Any amount of shading during the day will affect the design of the system. If shading is a concern, such as a tree or system mounted to the North side of a building, please let your solar lighting specialist know and we can discuss special design.

Will the solar lights dim if the battery storage gets too low?
The power designed for the light is for full intensity independent of the battery storage. Dimming only occurs if it is a predetermined function set forth and allowed through the controls for adaptive lighting.

Does solar power lighting have limitations within the design?
Solar does have limitateions to the design. Solar is usually offered to provide a cost savings as well as for environmental reasons. High wattage fixtures require a much larger solar panel that may not be able to be a self-contained unit. Solar is not usually able to operate a light fixture cost effectively in order to meet light level requirements for banks, car lots or large six lane highways. Applications where solar is feasible are standard parking, mininum security parking, perimeter areas and two to four lane roadways (.20 min to .50 min foot candle).

How long will the lights stay on each night?
The lights can be programmed to operate however the customer specifies. If the operation is dusk to dawn, then the system will turn on at dusk and turn off at dawn, which may be up to 15 hours in the winter.

What do I have to do to maintain the complete system?
Daily maintenance is not required. The only maintenance needed is when a componenet is reeaching the end of their life cycle. Each component life cycle can vary depending on environmental conditions. For example:
●Solar panels last approximately 25years
●Batteries last approximately 5-10 years
●LED fixtures last approximately 50k-100k hours
●Other electrical components vary from 5 to 15 years
It is important to know that the systems are designed with a 10%-30% power factor to account for dirt and snow build up. If certain environmental conditions are experienced at the project site, it is important to tell the solar designer so that these factors can be put into the system design.

Does the light fixture need a photocell to operate?
No as the standard solar power light generates power through current on the solar panel when the sun is out. As the sun sets, the current drops, which causes the system to operate the light.

Can I replace an existing fixture with a solar fixture?
Replacing an existing fixture with a solar fixture requires an in-depth analysis from one of our solar lighting specialists. Typically if there is power at the site, it is more cost feasible to install traditional grid lights; however, there are still cases where solar is the more cost feasible choice. Contact your solar lighting specialist to find out more information.

Can I mount the solar package and fixture to an existing pole?
The existing poles are usually designed for a specific weight and EPA loading. The pole requirements for solar usually require a more substantial pole. Solar is designed with approximately a minimum EPA of 4 to 25 square feet and weighs from 150 to 500 lbs.

How Solar Lighting Works
1.During the day, solar panels convert sunlight into electricity. This happens due to light photons striking a solar cell and knocking electrons free from the silicon atoms of the crystal structure of the cell.
2.The power generated from the solar is fed through our charge / load controller and charges the battery. 
3.The solar panel acts as a photocell turning the light on at night. The charge / load controller controls the discharge of the battery powering the light fixture to provide accurate lighting operation.
4.The solar panel will sense when it is daylight again and will tell the charge / load controller to turn the light back off in the morning and go back to charging mode.

The solar modules come in a variety of Wattages and can be put together to create even more power. Depending on the needs of the device or devices and the geographic location of the installation determines the needed amount of solar power. For example one light in Texas may use an 85 Watt panel, but the same light would need a larger panel or panels in Michigan. Making sure that the correct Wattage necessary for the application is critical when determining the solar panel used.